LEMON Manuals: Even more car manuals for everyone

Knee Blocker Airbag: Removal

  1. Open hood, disconnect and isolate the battery negative cable.
  2. Wait two minutes for the system reserve capacitor to discharge before beginning any system or component service.
  3. Remove the steering column opening cover two retaining screws and unsnap cover from instrument panel. See Fig 1.
    Fig 1: Instrument Panel Trim - Remove/Install
    GC0002472Courtesy of DAIMLERCHRYSLER CORP.
    1 - LEFT INSTRUMENT PANEL TRIM 3 - KNEE BLOCKER AIRBAG
    2 - INSTRUMENT PANEL ASSEMBLY 4 - INSTRUMENT PANEL STEERING COLUMN OUTER COVER
  4. Remove four knee blocker airbag retaining bolts from airbag. See Fig 2.
  5. Pull down knee blocker airbag and disconnect the one electrical connector. See Fig 2.
    Fig 2: Knee Blocker Airbag - Remove/Install
    GC0002471Courtesy of DAIMLERCHRYSLER CORP.
    1 - KNEE BLOCKER AIRBAG ELECTRICAL CONNECTOR
    2 - INSTRUMENT PANEL ASSEMBLY
    3 - KNEE BLOCKER AIRBAG
  6. Remove knee blocker airbag from vehicle.