LEMON Manuals: Even more car manuals for everyone

Checking And Adjusting Front Axle Camber And Caster: Checking

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
  1. Observe the general information on chassis alignment check. (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .
  2. Check the vehicle level at the front and rear axles. (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .
  3. Check the vehicle level at the front and rear axles with an electronic inclinometer and adjust if necessary. (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .
  4. Check the camber and assign to tabular value. (Refer to SUSPENSION/WHEEL ALIGNMENT - SPECIFICATIONS) .
    NOTE: Measure with the wheels turned to 20°.
  5. Check the caster and assign to tabular value. (Refer to SUSPENSION/WHEEL ALIGNMENT - SPECIFICATIONS) .