LEMON Manuals: Even more car manuals for everyone

Cruise Control Systems: Servo: Removal

Fig 1: Cable Routing
GC0002498Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the servo bracket bolt.
  3. Remove speed control cable from throttle cam by sliding clasp out hole used for throttle cable. See Fig 1.
    Fig 2: Cable to Servo Mounting
    GC0002496Courtesy of DAIMLERCHRYSLER CORP.
  4. Disconnect electrical connectors and vacuum hose.
  5. Remove two nuts attaching mounting bracket and speed control cable to servo. See Fig 2.
    Fig 3: Cable Clip
    GC0002497Courtesy of DAIMLERCHRYSLER CORP.
  6. Pull cable away from servo to expose retaining clip and remove clip attaching cable to servo. See Fig 3.
  7. Remove the servo.