LEMON Manuals: Even more car manuals for everyone

Removal - 2.4L Turbo

The generator is located above the oil filter and axle shaft. See Fig 1.

Fig 1: Generator Location - 2.4L Turbo
GC0021908Courtesy of DAIMLERCHRYSLER CORP.
1 - Oil Filter
2 - Generator
3 - Axle Shaft
  1. Disconnect the negative battery cable.
  2. Remove the 2 bolts from the top of the heat shield on the generator. See Fig 2.
    Fig 2: Generator Heat Shield
    GC0021907Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove nut from the upper T-bolt adjustment bracket. See Fig 3.
    Fig 3: Generator T-Bolt Lock Nut And Adjustment Bolt
    GC0021898Courtesy of DAIMLERCHRYSLER CORP.
  4. Raise vehicle and support.
  5. Remove the right front wheel.
  6. Remove the accessory drive splash shield. See Fig 4.
    Fig 4: Accessory Drive Splash Shield
    GC0021899Courtesy of DAIMLERCHRYSLER CORP.
    1 - ACCESSORY DRIVE BELT SPLASH SHIELD
  7. Remove the lower heat shield bolt.
  8. Remove the generator heat shield.
  9. Unplug the field circuit from the generator. See Fig 5.
    Fig 5: Battery Connection
    GC0021902Courtesy of DAIMLERCHRYSLER CORP.
    1 - FIELD CONNECTOR
    2 - BATTERY CONNECTION
  10. Remove the B+ terminal nut and wire.
  11. Loosen the accessory drive belt t-bolt. See Fig 3.
  12. Remove the pencil strut. See Fig 6.
    Fig 6: Strut Mounting
    GC0019531Courtesy of DAIMLERCHRYSLER CORP.
    1 - NUT
    2 - PENCIL STRUT
    3 - NUT
    4 - FLAT WASHER
    5 - LOWER TORQUE STRUT
  13. Loosen the lower generator pivot bolt. See Fig 7.
    Fig 7: Lower Pivot Bolt
    GC0021901Courtesy of DAIMLERCHRYSLER CORP.
    1 - LOWER PIVOT BOLT
  14. Remove the generator belt, refer to COOLING for more information.
  15. Remove the axle retaining nut.
  16. Remove the lower control arm from the steering knuckle. See Fig 8.
    Fig 8: Axle Shaft
    GC0021906Courtesy of DAIMLERCHRYSLER CORP.
    1 - Axle Shaft
    2 - Lower Control Arm
    3 - Steering Knuckle
  17. Remove the 2 bolts for the axle shaft bearing support.
  18. Remove the axle shaft assembly. See Fig 8. Put a container under the transmission to catch the transmission fluid from the transmission.
  19. Remove the generator from the lower mounting bracket and set generator to the side.
  20. Remove the lower mounting bracket for the generator. See Fig 9.
    Fig 9: Lower Mounting Bracket
    GC0021904Courtesy of DAIMLERCHRYSLER CORP.
  21. Remove generator through the axle shaft hole. See Fig 10.
Fig 10: Generator Removal/Installation
GC0021905Courtesy of DAIMLERCHRYSLER CORP.