LEMON Manuals: Even more car manuals for everyone

2. Fused Ignition Switch Output Circuit Open

With the ignition on.

Measure the voltage of the Fused Ignition Switch Output circuit at the SKREEM harness connector.

Fig 1: Measuring Voltage Of Fused Ignition Switch Output Circuit At SKREEM Harness Connector
G01837991Courtesy of DAIMLERCHRYSLER CORP.

Is the voltage above 10 volts? 

  1. Yes  >> Go to 3
  2. No  >> Repair the Fused Ignition Switch Output circuit for an open.

    See BODY VERIFICATION TEST  .