Intake/Exhaust Valves & Seats: Installation
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Coat valve stems with clean engine oil and insert them in cylinder head.
- If valves or seats have been reground, check valve tip height (A) (Fig 1). If valve tip height is greater than 43.65 mm (1.7185 in.) intake or 45.98 mm (1.8102 in.) exhaust, grind valve tip until within specifications. Make sure measurement is taken from cylinder head surface to the top of valve stem.
- Install valve stem seals and valve springs. (Refer to INSTALLATION ). (Refer to INSTALLATION ).