Clutch Assembly: Inspection
- Check for excessive wear, warpage or damage of clutch components. Replace clutch disc if lining is worn to .012" (.30 mm) measured from rivet heads to friction surface.
- Inspect diaphragm spring for excessive wear of fingers and looseness of strap rivets. Check pressure plate for scoring. Ensure flatness is within .020" (.50 mm). Using dial indicator, verify flywheel runout does not exceed .004" (.10 mm). Resurface or replace if specifications are exceeded.
- Check release bearing for rough rotation and/or excessive noise. Check diaphragm spring contact points for abnormal wear. Inspect bearing and fulcrum contact points of release lever for abnormal wear. Replace if necessary.