Warm DRIVEABILITY Test 8 - Bowl Vent Valve Check
- Disconnect bowl vent hose from the canister. Blow lightly into hose. Air should flow through hose. If air does not flow through hose, check for a restricted hose and/or repair the bowl vent.
- If air flows through hose, start the engine. Blow lightly into the hose. Air should not flow through hose. If air does not flow through hose, proceed to WARM DRIVEABILITY TEST 9 . If air flows through hose, repair the bowl vent.
NOTE:
Models equipped with 2-Bbl. carburetors use an electric bowl vent valve. Models equipped with 4-Bbl. carburetors use an external valve that closes with air pump pressure.