Cold DRIVEABILITY Test 2A - Choke Vacuum Kick Check (2-Bbl.)
- Remove air cleaner assembly. Position fast idle screw on the highest step of the fast idle cam. Remove vacuum hose from choke vacuum kick diaphragm. Connect a vacuum pump and apply 15 in. Hg vacuum to the diaphragm. Measure clearance between top of choke plate and air horn.
- Vacuum should remain at 15 in. Hg and choke plate should be set to .130". If vacuum does not remain at 15 in. Hg, replace vacuum kick diaphragm. Adjust vacuum kick as necessary. If vacuum remains constant, proceed to COLD DRIVEABILITY TEST 3 .