Limp-In Mode Test No. 4
- Turn ignition off. Disconnect MAP sensor connector. Disconnect both logic module connectors. Connect ohmmeter to White logic module connector cavity No. 4 and Black logic module connector cavity No. 4. There should be no continuity. If there is continuity, repair short in wiring between logic module connectors.
- If there is no continuity, connect ohmmeter to White logic module connector cavity No. 2 and Black logic module connector cavity No. 4. There should be no continuity. If there is continuity, repair short in wiring between logic module connectors.
- If there is no continuity, connect ohmmeter between Black logic module connector cavity No. 4 and ground. There should be no continuity. If there is continuity, repair short to ground in wiring to Black logic module connector cavity No. 4. If there is continuity, replace MAP sensor.