LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. GM5482075Courtesy of GENERAL MOTORS COMPANY

    Front Seat Belt Buckle (2) - Install

  2. Connect the electrical connector.
  3. If a NEW threaded component is being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded component is reused, prepare the threaded component using the following steps:
    1. Remove any loose cured adhesive from the external threads of the component using a lint free cloth.
    2. Thread the cleaned component into the internal mating threads and remove to loosen trapped cured adhesive.
    3. Remove loose debris from internal and external threads using compressed air.
    4. Apply liquid thread locking adhesive in a strip along half of the length of the external threads, starting at the tip, just prior to installation. Adhesives, Fluids, Lubricants, and Sealers 
  4. CAUTION:

    Refer to Fastener Caution .

  5. Front Seat Belt Buckle Fastener (1) - Install and tighten - Fastener Specifications 
  6. GM5308604Courtesy of GENERAL MOTORS COMPANY

    Front Seat (2) - Install - Front Seat Removal and Installation