Installation Procedure
- CAUTION:
Refer to Fastener Caution .
NOTE:The correct thread engagement is critical, hand start the fitting. Cross-threaded fittings can achieve proper tightness and still leak.
Transmission Fluid Cooler Pipe Connector (1) @ Transmission - Install and tighten - Fastener Specifications
Transmission Fluid Cooler Inlet Pipe (4) @ Transmission - Connect - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Transmission Fluid Cooler Pipe Bracket (3) - Install
- Transmission Fluid Cooler Pipe Bracket Bolt (2) - Install and tighten to 9 N.m (80 lb in)
- Transmission Fluid Cooler Pipe Clip (1) - Clip
Transmission Control Module Bracket (2) - Install - Transmission Control Module Bracket Replacement
- Battery Tray - Install - Battery Tray Replacement
- Front Wheelhouse Liner - Left Side - Install - Front Wheelhouse Liner Replacement
- Fill the transmission to the proper level with NEW transmission fluid. Transmission Fluid Level and Condition Check
- Inspect for transmission fluid leaks.
- Remove the drain pan.