LEMON Manuals: Even more car manuals for everyone

Removal Procedure

    NOTE:

    To perform this procedure the latch and bracket assembly Must be out of the vehicle to replace the side door lock cylinder assembly.

  1. Remove the front side door latch and side door outside handle bracket assembly as one. Refer to Front Side Door Latch Replacement .
  2. GM2756982Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not disconnect the inside or outside handle cable to replace the side door lock cylinder.

    Disconnect the front side door lock cylinder rod (1) from the cylinder.

  3. GM2756981Courtesy of GENERAL MOTORS COMPANY

    Use a suitable tool, release the lock cylinder (2) from the side door handle bracket locator (1) by pulling upward on the tabs.

  4. GM2756980Courtesy of GENERAL MOTORS COMPANY

    Remove the side door handle bracket locator (1) from the front side door lock cylinder (2) and the front door outside handle bracket assembly (3).

  5. Remove the door lock cylinder from the front side door outside handle bracket assembly.