LEMON Manuals: Even more car manuals for everyone

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Operate the component: Trunk Lid - Closed

    Verify the scan tool parameter: Rear Closure Ajar Switch = Inactive

    • If not the specified state 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified state 
  3. Operate the component: Trunk Lid - Ajar

    Verify the scan tool parameter: Rear Closure Ajar Switch = Active

    • If not the specified state 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified state 
  4. All OK.