LEMON Manuals: Even more car manuals for everyone

Liftgate Latch Replacement

GM3330935Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the rear end trim finish panel. Refer to Rear End Trim Finish Panel Replacement .
1 Liftgate Latch Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Liftgate Latch Assembly

Procedure

  1. Disconnect the electrical connector.
  2. Disconnect the rear compartment lid lock cylinder cable. Refer to Rear Compartment Lid Lock Cylinder Replacement .
  3. Adjust the liftgate if needed.