Navigation Inoperative Displays Optimizing Search (PIT5658)
Publication date: 2019-03-01Reference number: PIT5658
NAVIGATION INOPERATIVE DISPLAYS OPTIMIZING SEARCH
TECHNICAL SERVICE BULLETIN
Reference Number(s): PIT5658, Date of Issue:
Mar 1, 2019
SERVICE INFORMATION
| Brand: | Model: | Model Year: | VIN: | Engine: | Transmission: | ||
|---|---|---|---|---|---|---|---|
| from | to | from | to | ||||
| Cadillac | XT4 | 2019 | All | All | All | All | |
| Cadillac | CT6 | 2019 | All | All | All | All | |
| Chevrolet | Blazer | 2019 | All | All | All | All | |
| Chevrolet | Camaro | 2019 | All | All | All | All | |
| Chevrolet | Colorado | 2019 | All | All | All | All | |
| Chevrolet | Equinox | 2019 | All | All | All | All | |
| Chevrolet | Malibu | 2019 | All | All | All | All | |
| Chevrolet | Silverado 1500 (New Model) | 2019 | All | All | All | All | |
| Chevrolet | Volt | 2019 | All | All | All | All | |
| GMC | Canyon | 2019 | All | All | All | All | |
| GMC | Sierra 1500 (New Model) | 2019 | All | All | All | All | |
| GMC | Terrain | 2019 | All | All | All | All | |
| Involved Region or Country | North America |
| Additional Options (RPO) | Equipped with Infotainment system with Navigation (IOU or IOT) |
| Condition | After radio software was updated via either an Over-the-Air update or a previous service repair the navigation system may not function or becomes stuck on the navigation loading screen, displaying a message "optimizing search." |
| Cause | The lack of accepted permissions prevents navigation operation. |
CORRECTION
Accept permissions following the procedure outlined below.
Service Procedure
NOTE:
This information only applies to navigation radios on software level V507 or V509. To check software level press Settings > System Tab > About > Build Version. A permanent solution will be available in a future software release.
Navigation requires permission to access your phone and contacts to enable certain features. Phone access is needed to enable the "Call" feature. Contact access is needed to enable the "Drive to contact" feature.
- Ignition on.
- On the radio display, select: Settings > System tab > Privacy > Used By Applications > Nav
- Turn "on" any that are shown to be off / disabled.
- Turn Ignition off. Open and close the driver door to disable retained accessory power (RAP).
- Wait for the OnStar LED to Turn Off.
- Turn Ignition on and launch navigation to verify operation.
WARRANTY INFORMATION
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
| Labor Operation | Description | Labor Time |
|---|---|---|
| *3481178 | Reset Navigation Permissions | 0.2 |
| *This is a unique Labor Operation for Bulletin use only. | ||
| Version | 1 |
| Modified | 03/01/2019 - Created on |