LEMON Manuals: Even more car manuals for everyone

Brake Pedal Position Sensor Replacement

WARNING: This page is about a different car, the 2018 GMC Canyon and 2018 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
GM3712906Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedures 
Remove the instrument panel knee bolster outer deflector. Refer to Instrument Panel Knee Bolster Deflector Replacement .
1 Brake Pedal Position Sensor Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
3 N.m (27 lb in)
2 Brake Pedal Position Sensor

Procedure

  1. Disconnect the electrical connector.
  2. After the installation is complete, calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration .