LEMON Manuals
: Even more car manuals for everyone
Home
›
Chevrolet
›
2014
›
Traverse LTZ, AWD
›
Repair and Diagnosis
›
Engine Performance
›
Engine Control Systems
›
Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions
›
Repair Instructions
›
Ignition Coil Replacement - Bank 2
›
Removal Procedure
Removal Procedure
Remove the intake manifold. Refer to
Intake Manifold Replacement
Fig 1: Identifying Engine Wiring Harness Electrical Connector
Courtesy of GENERAL MOTORS COMPANY
Disconnect the engine wiring harness electrical connector(s) (5) from the ignition coil(s) (4).
Remove the ignition coil bolt(s).
Fig 2: Identifying Left Cylinder Head Ignition Coils
Courtesy of GENERAL MOTORS COMPANY
Remove the ignition coil(s).