LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
    Fig 1: View Of Ignition Coil Electrical Connector
    GM1860397Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the engine wiring harness electrical connector(s) (1) from the ignition coil(s) (4).
  3. Remove the ignition coil bolt(s).
    Fig 2: Ignition Coil View
    GM860797Courtesy of GENERAL MOTORS COMPANY
  4. Remove the ignition coil(s).