LEMON Manuals
: Even more car manuals for everyone
Home
›
Chevrolet
›
2014
›
Traverse LTZ, AWD
›
Repair and Diagnosis
›
Engine Performance
›
Engine Control Systems
›
Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions
›
Repair Instructions
›
Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake
›
Installation Procedure
Installation Procedure
Install the CMP sensor (2) and bolt. Tighten the bolt to 10 N.m (89 lb in).
Fig 1: View Of CMP Sensor Bolt & Sensor
Courtesy of GENERAL MOTORS COMPANY
CAUTION:
Refer to
Fastener Caution
.
Connect the engine wiring harness electrical connector (1) to the bank 1 intake CMP sensor (2).
Fig 2: Identifying Intake & Exhaust Camshaft Position (CMP) Sensors
Courtesy of GENERAL MOTORS COMPANY