Removal Procedure
- Place the front side door window in the full down position.
- Apply several layers of masking tape (2) to the bottom and inner edge of the outside rearview mirror housing (3) in order to protect the painted finish.
WARNING: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.
- Push the mirror glass (1) inward at the top outer corner until full travel is reached.
- Remove the mirror glass do the following:
NOTE: Do not use the suitable tool (flat plastic) to pry with. It must be used in a twisting motion only to release the mirror glass from the motor.
- Retain pressure on the top outer corner of the mirror glass (4).
- Insert a flat plastic suitable tool (1) between the two tabs (2) located behind the glass.
- Twist the flat plastic suitable tool (1) between the tabs (2) until the mirror glass releases from the motor.
- Disconnect the electrical connectors.
- Remove the mirror glass.