LEMON Manuals: Even more car manuals for everyone

Component Testing

  1. Perform the Fluid Leak Diagnosis .
  2. Verify airflow through the radiator is not obstructed.
  3. Perform the Transmission Fluid Level and Condition Check procedure.
  4. Perform the Transmission Fluid Cooler Flushing and Flow Test .
  5. With a hand held or infra red thermometer or DT-24731  tempil stick, test for the transmission cooler supply line thermal bypass valve assembly opening at 96°C (205°F). The transmission cooler supply line temperature should be higher on the transmission side of the thermal bypass valve assembly than the cooler side until 96°C (205°F) is reached.
    • If the thermal bypass valve tests stuck closed 

      Replace the thermal bypass valve assembly.

    • If the thermal bypass valve tests normal 

      Inspect the transmission oil passages for a blockage.

    • If passages are blocked 

      Repair as necessary.

    • If passages are not blocked 
  6. All OK.