LEMON Manuals: Even more car manuals for everyone

Catalytic Converter Replacement - Right Side

Fig 1: Catalytic Converter - Right Side
GM3357028Courtesy of GENERAL MOTORS COMPANY
Catalytic Converter Replacement - Right Side

Callout Component Name

Preliminary Procedure

  1. Remove the floor panel tunnel panel reinforcement. Refer to Floor Panel Tunnel Panel Reinforcement Replacement .
  2. Remove the heated oxygen sensor. Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 2 .
  3. Place an adjustable jack stand underneath the intermediate pipe to support the exhaust system during service.
  4. Disconnect the catalytic converter from the intermediate pipe. Refer to Intermediate Pipe Replacement .
1 Catalytic Converter-to-Exhaust Manifold Fasteners (Qty: 4)
CAUTION:

Refer to Fastener Caution .

Procedure

  1. Remove the exhaust manifold fasteners and DISCARD.
  2. Install NEW exhaust manifold fasteners.

Tighten 
50 (37 lb ft)
2 Exhaust Manifold Studs

Procedure

  1. Remove the exhaust manifold studs and DISCARD.
  2. Install NEW exhaust manifold studs.

Tighten 
22 (16 lb ft)
3 Catalytic Converter
Procedure 
Install a NEW exhaust manifold gasket.