LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Fig 1: Identifying Fuel Tank Wiring Harness Electrical Connectors
    GM1906531Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the fuel tank wiring harness electrical connector from the fuel pressure sensor (1).
  4. Fig 2: Identifying Fuel Pressure Sensor & EVAP Canister
    GM1906532Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    It is not necessary to remove the evaporative emission (EVAP) canister in order to remove the fuel pressure sensor.

  5. Using a small flat-bladed tool, gently pry the fuel pressure sensor (1) out of the EVAP canister in order to remove the sensor.