Installation Procedure
- Apply a light coat of high temperature brake lubricant to the park brake shoe contact areas of the parking brake anchor backing plate.
Courtesy of GENERAL MOTORS COMPANY
- Install the front park brake shoe (1), rear park brake shoe (2), and the lower retaining spring (3) to the parking brake anchor backing plate.
Courtesy of GENERAL MOTORS COMPANY
- While holding the front park brake shoe hold down spring pin (1) stationary, compress and rotate the hold down spring and cup (2) 1/4 turn.
Courtesy of GENERAL MOTORS COMPANY
- While holding the rear park brake shoe hold down spring pin (1) stationary, compress and rotate the hold down spring and cup (2) 1/4 turn.
Courtesy of GENERAL MOTORS COMPANY
- Install the park brake shoe adjuster (1).
- Install the rear park brake shoe hold down spring (1) by compressing the spring and rotating 1/4 turn.
Courtesy of GENERAL MOTORS COMPANY
- Install the upper park brake shoe retainer spring (1).
- Adjust the park brake. Refer to Parking Brake Adjustment .