LEMON Manuals: Even more car manuals for everyone

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the appropriate X80 Accessory Power Receptacle or E32 Cigarette Lighter Receptacle.
  2. Test for less than 5 Ω between the ground circuit terminal C and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Verify that a test lamp illuminates between the B+ circuit terminal A and ground.
    • If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.
  4. Replace the X80 Accessory Power Receptacle or E32 Cigarette Lighter Receptacle.