LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement .
  2. Fig 1: Identifying engine wiring harness electrical connector
    GM1731857Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note wire routing prior to removal.


    Disconnect the turbocharger vane position sensor electrical connector.
  3. Remove the turbocharger vane position sensor connector from the bracket on the LH valve cover.
  4. Fig 2: Turbocharger Vane Position Sensor
    GM1731868Courtesy of GENERAL MOTORS COMPANY

    Remove the turbocharger vane position sensor from the turbocharger.