LEMON Manuals
: Even more car manuals for everyone
Home
›
Chevrolet
›
2010
›
Cutaway 6.6 L
›
Repair and Diagnosis
›
Engine Performance
›
Engine Control Systems
›
Engine Controls And Fuel - 6.6L (LGH) - Repair Instructions
›
Repair Instructions
›
Nitrogen Oxides Sensor Replacement - Position 2
›
Removal Procedure
Removal Procedure
Raise and support the vehicle. Refer to
Lifting And Jacking The Vehicle
.
Fig 1: Nitrogen Oxide Sensor - Position 2
Courtesy of GENERAL MOTORS COMPANY
Remove the nitrogen oxide sensor (1) from the exhaust.
Remove the nitrogen oxide sensor fasteners (2) then remove the sensor (3).