Installation Procedure
- Position the garage door opener (2) to the overhead console.
- Install the screws to secure the garage door opener (2) to the overhead console and tighten to 2 N.m (18 lb in) .
- Connect the electrical connectors.
- Align the overhead console within the vehicle.
- Press up on the overhead console engaging the fasteners in order to secure the console to the vehicle.
- Install the overhead console mounting screw and tighten to 2 N.m (18 lb in) .
- Install the courtesy lamp lens.
- Refer to Control Module References for programming and setup information.
CAUTION:
Refer to Fastener Caution
.