LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. Lubricate the CKP sensor O-ring with clean engine oil.
  2. Fig 1: Identifying Crankshaft Position (CKP) Sensor
    GM1712672Courtesy of GENERAL MOTORS CORP.
  3. Install the CKP sensor (1).

    Tighten:   Tighten the nuts to 10 Nm (89 lb in).

  4. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  5. Install the CKP sensor stud (2).

    Tighten:   Tighten the nuts to 10 Nm (89 lb in).

  6. Connect the engine harness electrical connector to the CKP sensor.
  7. Install exhaust manifold. Refer to EXHAUST MANIFOLD REPLACEMENT - RIGHT (3.9L) .