LEMON Manuals: Even more car manuals for everyone

Conditions for Setting the DTC

  1. The ECM detects that the HO2S bank 1 sensor 2 or HO2S bank 2 sensor 2 did not transition below 349 mV and above 710 mV during the passive test.
  2. One of the following tests fail:
    • Lean Intrusive Test
      • The ECM detects that the HO2S bank 1 sensor 2 or HO2S bank 2 sensor 2 is more than 349 mV for 60 seconds.
      • The HO2S bank 1 sensor 1 and HO2S bank 2 sensor 1 is less than 300 mV.

        OR

    • Rich Intrusive Test
      • The ECM detects that the HO2S bank 1 sensor 2 or HO2S bank 2 sensor 2 is less than 710 mV for 60 seconds.
      • The HO2S bank 1 sensor 1 and HO2S bank 2 sensor 1 is more than 600 mV.