Installation Procedure
- Install the master cylinder to the mounting bolts and install the locknuts.
Tighten: Tighten the clutch master cylinder locknuts to 22 N.m (16 lb ft) .
- Connect the pipe to the master cylinder.
- Connect the reservoir hose to the master cylinder and tighten the spring clamp.
- Coat the piston rod bolt with multi-purpose grease.
- Install the piston rod clevis, the piston rod bolt, and the locking washer onto the clutch pedal.
- Bleed the air. Refer to Hydraulic Clutch Bleeding .
- Adjust the clutch pedal. Refer to Clutch Pedal Free Travel Adjustment .
- Fill the reservoir with clutch/brake fluid up to the MAX level.
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.