LEMON Manuals: Even more car manuals for everyone

Installation Procedure

NOTE: Do not start the engine with any power steering hose disconnected, or damage to the components could occur.
    Fig 1: View Of Power Brake Booster Inlet/Outlet Hoses To Power Brake Booster
    GM701194Courtesy of GENERAL MOTORS CORP.
  1. Install the hydraulic brake booster outlet hose to the vehicle.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Connect the hydraulic brake booster outlet hose to the hydraulic brake booster.

    Tighten:  Tighten the hydraulic brake booster outlet hose to the hydraulic brake booster to 27 N.m (20 lb ft).

  4. Fig 2: View Of Hydraulic Brake Booster Outlet Hose To Power Steering Gear
    GM701187Courtesy of GENERAL MOTORS CORP.
  5. Connect the hydraulic brake booster outlet hose to the power steering gear.

    Tighten:  Tighten the hydraulic brake booster outlet hose to the power steering gear to 27 N.m (20 lb ft).

  6. Remove the drain pan.
  7. Install the hydraulic brake booster outlet hose tie straps.
  8. Bleed the system. Refer to Bleeding the Power Steering System .