LEMON Manuals: Even more car manuals for everyone

Installation Procedure

NOTE: Do not start the engine with any power steering hose disconnected, or damage to the components could occur.
    Fig 1: View Of Power Brake Booster Inlet/Outlet Hoses To Power Brake Booster
    GM701194Courtesy of GENERAL MOTORS CORP.
  1. Install the hydraulic brake booster inlet hose to vehicle.
  2. Connect the hydraulic brake booster inlet hose to the hydraulic brake booster.
  3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  4. Fig 2: Identifying Hydraulic Brake Booster Inlet Hose
    GM701151Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Connect the hydraulic brake booster inlet hose to the power steering pump.

    Tighten:  Tighten the hydraulic brake booster inlet hose to the power steering pump to 27 N.m (20 lb ft).

  6. Bleed the system. Refer to Bleeding the Power Steering System .