LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Place the fuel pressure gage bleed hose into an approved container and open the bleed valve to bleed fuel system pressure.
  2. Fig 1: View Of J 34730-1A Installed To Fuel Rail
    GM736294Courtesy of GENERAL MOTORS CORP.
  3. Place a shop towel under the fuel pressure gage adaptor fitting to catch any remaining fuel spillage.
  4. Remove the J 34730-1A  from the adaptor fitting.
  5. Remove the J 34730-262  .
  6. Drain any fuel remaining in the fuel pressure gage into an approved container.
  7. Install the cap on the fuel pressure connection.