LEMON Manuals: Even more car manuals for everyone

Cruise Control Indicator Always On

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
Cruise Control Indicator Always On

Step Action Yes No
Schematic Reference: Cruise Control Schematics 
1 Did you perform the Cruise Control Diagnostic System Check? Go to Step 2  Go to Diagnostic System Check - Cruise Control 
2 Turn ON the ignition, with the engine OFF.
Does the Cruise indicator illuminate after the instrument panel cluster (IPC) displays test?
Go to Step 3  Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
3
  1. Turn OFF the ignition.
  2. Install a scan tool.
  3. Turn ON the ignition, with the engine OFF.
  4. With the scan tool, observe the Cruise Control parameter in the IPC Input/Output data list.
Does the Cruise Control parameter display On?
Go to Step 4  Go to Step 5 
4
IMPORTANT: Program the replacement powertrain control module (PCM).
Replace the PCM. Refer to Powertrain Control Module (PCM) Replacement in Engine Controls - 4.8L, 5.3L, 6.0L.Did you complete the replacement?
Go to Step 6  -
5 Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gages, and Console.
Did you complete the replacement?
Go to Step 6  -
6 Operate the system in order to verify the repair.
Does the system operate properly?
System OK Go to Step 2