LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. Install the front door lock switch to the inside door handle bezel. Refer to Power Door Lock Switch Replacement (Impala)  or Power Door Lock Switch Replacement (Monte Carlo) .
  2. Install the bezel to the front door trim panel.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the screw to the inside door handle bezel.

    Tighten:  Tighten the screw to 2 N.m (18 lb in).

  5. Fig 1: Inside Door Handle Bezel (Impala)
    GM459406Courtesy of GENERAL MOTORS CORP.