LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Remove the tie rod ball stud nut.
    Fig 1: Removing Tie Rod Ball Stud Nut
    G01482917Courtesy of GENERAL MOTORS CORP.
    NOTE: Do not attempt to free the ball stud by using a pickle fork or wedge type tool, because seal or bushing damage could result. Use the proper tool to separate all ball joints.
  2. Use the J 24319-B  in order to separate the outer tie rod from the steering knuckle.
    Fig 2: Identifying Outer Tie Rod
    G01482918Courtesy of GENERAL MOTORS CORP.
  3. Loosen the tie rod jam nut (2).
    Fig 3: Loosening Tie Rod Jam Nut (2)
    G01482919Courtesy of GENERAL MOTORS CORP.
  4. Remove the outer tie rod (3) from the inner tie rod (1).
    Fig 4: Removing Outer Tie Rod (3) From Inner Tie Rod (1)
    G01482920Courtesy of GENERAL MOTORS CORP.