LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Disconnect the Heated Oxygen Sensor (HO2S1) electrical connectors and detach the couplers from the coupler mounting bracket.
  2. Raise and support the vehicle. Refer to LIFTING & JACKING VEHICLE in General Information.
  3. Remove the propeller shaft. Refer to PROPELLER SHAFT REPLACEMENT - FRONT .
  4. Remove the 2 bolts (1) from the front pipe assembly (2).
    Fig 1: Removing Bolts From Front Pipe Assembly
    G01471729Courtesy of GENERAL MOTORS CORP.
  5. Remove the 6 front pipe nuts (1) from the exhaust manifolds (2).
  6. Remove the front pipe and the exhaust manifold gaskets.
    Fig 2: Front Pipe & Exhaust Manifold Gaskets
    G01471730Courtesy of GENERAL MOTORS CORP.