LEMON Manuals: Even more car manuals for everyone

Transaxle Mount Assembly (Side): Installation

  1. Transfer the rear upper mount to the new mount.
  2. Position the mount and start the rear upper bolt into the threads.
  3. Install the remaining 3 bolts.
  4. Tighten all 4 of the mount bolts to specification. See TORQUE SPECIFICATIONS  .
  5. Install the mount thru-bolt. Tighten the mount thru-bolt to specification. See TORQUE SPECIFICATIONS  .
  6. Remove the jackstand and the wood block.
  7. Install the left splash shield.
  8. Install the left tire and wheel assembly.
  9. Lower the vehicle.