LEMON Manuals: Even more car manuals for everyone

Low/Reverse Servo Assembly: Installation

  1. Assemble low/reverse servo assembly.
  2. Install the low-reverse band servo and cover. See Figure . Install and tighten the bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Install the oil feed pipe. See OIL FEED PIPES  .
  4. Install the oil filter and pan. See DRAINING & REFILLING  under REMOVAL & INSTALLATION.
  5. Lower the vehicle.
  6. Refill the transaxle with appropriate fluid to proper level. See LUBRICATION  .