Removal Procedure
- Disconnect the Heated Oxygen Sensor (HO2S1) electrical connectors and detach the couplers from the coupler mounting bracket.
- Raise and support the vehicle. Refer to LIFTING & JACKING THE VEHICLE
.
- Remove the propeller shaft. Refer to PROPELLER SHAFT REPLACEMENT-FRONT
.
- Remove the 2 bolts (1) from the front pipe assembly (2).
Courtesy of GENERAL MOTORS CORP.
- Remove the 6 front pipe nuts (1) from the exhaust manifolds (2).
Courtesy of GENERAL MOTORS CORP.
- Remove the front pipe and the exhaust manifold gaskets.