LEMON Manuals: Even more car manuals for everyone

Code 74 - EVO Actuator Circuit Shorted To Battery Or Solenoid Shorted: Notes

When EBCM commands enable relay on, battery voltage is supplied to Electronic Variable Orifice (EVO) actuator. EVO actuator ground is provided by EBCM EVO actuator control terminal. EBCM controls amount of current supplied to EVO actuator based on input from wheel speed sensors and steering wheel speed sensor.

Code 74 can set anytime after ABS initialization if excessive voltage drop across EVO actuator driver is detected. Code will be stored, VES will be disabled and power steering returns to full assist. Code 74 will clear when setting conditions no longer exist and ignition key is turned off.

NOTE: Test numbers refer to numbers on diagnostic chart. Use only 10-megohm (minimum) DVOM for all voltage and resistance tests. For identification of circuits and terminals referenced in charts and text, see WIRING DIAGRAM  .
Fig 1: Code 74 Diagnostic Flow Chart
G95E15697Courtesy of GENERAL MOTORS CORP.
  1. Checks for short to voltage in EVO actuator control circuit.
  2. Checks for shorted actuator solenoid or shorted actuator circuits.
  3. Ensures malfunction was not due to physical damage to circuitry.
  4. Isolates malfunction to either actuator solenoid or its circuitry.