Diagnostic Aids
Intermittent problem may be caused by poor connection, rubbed-through wire insulation or broken wire inside insulation. Lamp Test feature of Tech 1 scan tool may be used to turn on warning light while looking for intermittent problem in warning light circuit.
Enhanced diagnostic feature of Tech 1 scan tool can be used to check frequency of problem. Any circuit suspected of causing intermittent problem should be checked thoroughly for backed-out terminals, improper mating, broken connector locks, damaged terminals and poor terminal-to-wiring connections.
- 8) Verifies that other instrument panel indicator lights are functioning properly.
- 9) Determines if ABS warning light can be manually turned on.
- 10) Checks for short to ground in ABS warning light circuit.
- 11) Verifies condition of fuse.
- 12) Determines if Code 11 was set due to an EBCM/EBTCM malfunction.
Intermittent problem may be caused by poor connection, rubbed-through wire insulation or broken wire inside insulation. Lamp Test feature of Tech 1 scan tool may be used to turn on warning light while looking for intermittent problem in warning light circuit.
Enhanced diagnostic feature of Tech 1 scan tool can be used to check frequency of problem. Any circuit suspected of causing intermittent problem should be checked thoroughly for backed-out terminals, improper mating, broken connector locks, damaged terminals and poor terminal-to-wiring connections.