LEMON Manuals: Even more car manuals for everyone

Hall Effect Unit

This unit is mounted above the distributor pick-up coil on 2.5L engines only. This unit is used in place of the "R" terminal of the conventional HEI module to send engine RPM signals to ECM. The 1.8L does use the "R" terminal for engine RPM reference.

Fig 1: Component Location for 1.8L Engine
G09315788Courtesy of GENERAL MOTORS COMPANY
NOTE: More sensors are used by the ECM to control engine performance and other systems. Refer to "GENERAL MOTORS COMPUTER COMMAND CONTROL SYSTEM" in Computerized Engine Controls section for more information.