LEMON Manuals: Even more car manuals for everyone

Automatic Choke Setting

Remove air cleaner and check to see that choke valve and rod move freely. Disconnect choke rod at choke lever. On all engines except 2-Bbl. V8 engines, hold choke valve closed and push rod downward to contact stop. The top of rod should be even with bottom of hole in choke lever. On 2-Bbl. V8 engines, hold choke valve closed and pull rod upward to end of travel. The bottom of rod should be even with top of hole in choke lever.

NOTE: If necessary, adjust rod length by bending rod at offset bend. Bend must be such that rod enters choke lever hole freely end squarely.