LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. GM5060867Courtesy of GENERAL MOTORS COMPANY

    Install the power transfer unit drain plug (2) and seal and tighten to 40 N.m (30 lb ft).

  2. Fill the power transfer unit to the bottom of the power transfer unit fill plug hole with the recommended fluid. Adhesives, Fluids, Lubricants, and Sealers , and Approximate Fluid Capacities 
  3. Install the power transfer unit fill plug (1) and seal and tighten to 40 N.m (30 lb ft).
  4. Install the power transfer unit heat shield. Power Transfer Unit Heat Shield Replacement