LEMON Manuals: Even more car manuals for everyone

Rear Side Door Window Rear Channel Replacement

Fig 1: Rear Side Door Window Rear Channel
GM3417084Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the rear side door trim. Refer to Rear Side Door Trim Replacement .
  2. Remove the rear side door armrest plate bolts and plate from the inner door panel.
  3. Remove the rear door water deflector.
1 Rear Side Door Stationary Window Divider Channel Lower Support Bolt (Qty: 2)
CAUTION: Refer to Fastener Caution .

Procedure

  1. Place the window in the full up position.
  2. Pull the rear side door window rear channel downward and away from the stationary window.

Tighten 
11.5 N.m (102 lb in)
2 Rear Side Door Window Rear Channel
Procedure 
When installing the rear side door window rear channel, ensure that it is in line with the stationary window so that the window will roll properly.
NOTE: Inspect the window for proper operation before installing the door trim.