LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Lower the window all the way down.
  2. Remove the rear side door trim panel. Refer to Rear Side Door Trim Replacement
  3. Remove the rear side door garnish molding. Refer to Rear Side Door Window Garnish Molding Replacement
  4. Remove the rear side door water deflector.
  5. Remove the rear side door window inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement 
  6. Remove the rear side door window belt reveal molding. Refer to Rear Side Door Window Belt Reveal Molding Replacement 
  7. Connect the rear side door trim panel electrical connector.
  8. Run the window to the fully up position.
  9. Tape the window in the up position.
  10. Loosen rear side door front window run channel bolts and reposition channel.
  11. Loosen the window regulator guide nuts 4 revolutions.
  12. Using the power window switch, lower the window regulator to the fully down position.
  13. Remove the tape.
  14. Slide the window down past the window regulator guides and out of the front window run channel.
  15. Fig 1: Removing & Installing Rear Door Window
    GM758774Courtesy of GENERAL MOTORS COMPANY
  16. Lift the rear side door window out of the door.