Removal Procedure
NOTE:
- Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
- Always route the replacement cable the same as the original cable.
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (With Side Post) , Battery Negative Cable Disconnection and Connection (With Top Post) .
- Disconnect the battery positive cable from the battery.
- Depress the tabs in order to remove the cover from the electrical center.
- Remove the nut (1) securing the battery positive cable (2) to the electrical center.
- Reposition the protective boot from the generator output BAT terminal for access.
- Remove the generator output BAT terminal nut (3) and disconnect the battery positive lead (2) from the generator.
- Remove the starter terminal nut (1) and disconnect the battery positive cable (2) from the starter.
- Lower the vehicle.
- Remove the battery positive cable from the engine.